Finding a woodworking niche is wonderful. It is a lot of fun, but your probably need some tips to get started. Keep reading to understand woodworking better and to set yourself up for lots of enjoyment.
If you plan on staining your project, try using pre-stain conditioner on your wooden surfaces. If you use pre-stain conditioners on your project, you’re going to be not as likely to have irregularities on the project when you’re done. These conditioners are going to help smooth out the wood so that the stain can get into it more evenly.
When working with stains, dab a small amount in a test area to see how it comes out. This will prevent you from getting an unwanted stain color on your final product. Wood is not always predictable, so you can stay away from disappointment and mistakes with this easy test.
Many people have a small ruler on them when working in the shop. Sometimes it will fall out of your pocket when you move around. Instead of wood, choose a metal rule and keep it with your magnet. This magnet helps you keep the objects together and in your pocket.
Rulers don’t like to stay in pockets, but you need them to be handy! To solve this problem, purchase a metal ruler and keep it next to a small telescoping magnet in your pocket. The magnet keep both items tight in your pocket.
Be aware of the different kinds of characteristics of the wood you are working with, before you choose it for project where staining is involved. Some woods are only paint grade, while stain grade woods are much better for staining. Also, veneer and particleboard greatly differ. Particleboard absorbs a lot of stain while veneer doesn’t absorb much at all. Using the proper wood makes sure that your project ends up the way you’d like it to.
Try not to spend too much time using tape measures. Story sticks can work wonders, and it is possible to work gradually towards the cut you want. It’s recommended that you cut on scrap wood before cutting on the wood you plan on using so that you can test it out to see if it will fit. Having a lot of ways you can plan on making a cut can keep boredom at bay.
When woodworking, things can fly in your eyes unexpectedly. So don’t think that you shouldn’t wear goggles or else you may end up injuring your eyes for good. If the goggles you have do not fit well and provide clear sight, purchase a pair that do.
Keep an eye out for recycled wood. Lots of places get rid of scrap pieces that would be perfect for your uses. Oftentimes, flooring and home improvement stores will discard wood scraps and unused wood. Use this to your advantage as often as you can, there really is no reason not to. You will save money doing this too.
Your woodworking area should be well-lit. You need plenty of light when you paint, sand or stain a particular project. This will allow you to figure out if you are sanding properly. Also, having plenty of light will ensure that any stains you are working on are applied evenly.
Look out for old furniture getting thrown out. These pieces are often very inexpensive or are given away for free. Think about all the possibilities before you dismiss a piece. You could use the wood from an old dresser to make something.
Safety is optimal when you are woodworking. If you are crosscutting, clamp a block to the fence when you want to set the cut length. Just using the fence can cause the board to spring back; however, clamping the board will prevent this. And, it will keep the board free for cutting.
Build your own sanding block. Sanding is much easier with a sanding block, but it is not necessary to purchase a commercial holder for sandpaper. Simply use plywood that’s scrap to create your own. Cut the wood into the right size and apply sandpaper with spray adhesive.
When you use a fly cutter for a project, know that it is dangerous. Paint the tips of the fly cutter with fluorescent paint. You will be able to see them and avoid them better, and this will make your job safer.
As mentioned before, this article can teach you lots of things about woodworking to make you a great woodworker. Luckily, you just read paragraphs full of useful information. The next step is to continue learning and put what you learn to use.